Does a rear blade fit a TYM T654?

On paper, the TYM T654 clears 0 of 8 curated rear blade classes in our catalog and 8 incompatible. Most common fail check: hitch category (8 of 8 classes). Checks use verified hitch/PTO overlays and lift Facts — we never invent PTO horsepower.

compatible
0 compatible
partial
0 partial
incompatible
8 incompatible

Open in Fit checker →Implement hub →Fit guide →Tractor profile →

Verified Facts for this tractor

Engine HP
67 HP
Hitch
Category II
PTO HP
61.9 PTO HP
PTO RPM
540
Rear lift
3,153 lbs @ 24″

Before you buy

  • TYM T654 is utility class — more frame mass and lift than compacts, but implement sheets and PTO still govern the buy.
  • Verified hitch: Category II. Implements must name that class explicitly — adapters do not add lift.
  • Verified PTO rating: 61.9 PTO HP. Size PTO implements from this number — not from engine HP.
  • Catalog rear lift: 3,153 lb @ 24″. Heavier rear blade tools need headroom over shipping weight (we screen with ~20% margin).
  • None of the curated rear blade classes clear hitch/PTO/lift on paper — try a narrower tool, a hitch-rated variant, or a larger tractor.
  • Next step: open the Fit checker with TYM T654 and a specific rear blade model, or read the fit guide for this implement type.

What Fit checks for this implement type

Rear blades are typically non-PTO scraping tools. Hitch category and rear lift drive paper Fit; angle and offset kits do not raise tractor ratings.

What usually fails first

Lift capacity and hitch class on light frames. Heavier utility blades want more mass than a sub-compact can safely carry.

How to use this hub

Compare hitch and weight Facts below, then run Fit. Confirm ballast and OEM manuals before driveway or snow scraping.

On the TYM T654

On the TYM T654, none of the 8 curated rear blade classes clear hitch/PTO/lift on paper — usually hitch category (e.g. 72″ rear blade (compact class)). Try a narrower tool or a larger tractor class.

Results by implement class

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~340 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~357 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~383 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~443 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~476 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~510 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~420 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

    • Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
    • PTO power: Implement does not require PTO horsepower.
    • PTO speed: Implement does not require a PTO RPM match.
    • Rear lift capacity: 3153 lb lift @ 24″ clears ~504 lb required (weight + 20%).
    • Sub-compact size: Sub-compact geometry check not applicable.

    Full fit page →Source

Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.

FAQ

Which rear blade classes clear on paper for the TYM T654?
None of the 8 curated rear blade classes clear hitch/PTO/lift on paper.
What does Partial mean?
A Fact is missing — usually PTO horsepower or hitch category. Engine HP is not a substitute. We mark gaps instead of inventing numbers.
Which rear blade classes fail on the TYM T654?
8 class(es) fail — including Land Pride RB1660 Rear Blade, Land Pride RB1672 Rear Blade, and Land Pride RB1684 Rear Blade — usually on hitch category. Narrower tools or hitch-rated variants may differ.
How do I check a specific rear blade on the TYM T654?
Open the Attachment Fit checker with the TYM T654 and rear blade type, open a result row below, or follow the source link on each implement.

Next steps

Other implements for this tractor