Does a post hole digger fit a TYM T254?
On paper, the TYM T254 clears 0 of 5 curated post hole digger classes in our catalog, with 2 Partial (at least one limit not confirmed) and 3 incompatible. Most common fail check: PTO horsepower (3 of 5 classes). Checks use verified hitch/PTO overlays, lift Facts and maker-published HP limits. We never invent a number.
- compatible
- 0 compatible
- partial
- 2 partial
- incompatible
- 3 incompatible
Open in Fit checker →Implement hub →Fit guide →Tractor profile →
Verified Facts for this tractor
- Engine HP
- 23.9 HP
- Hitch
- Limited Category I
- PTO HP
- 18.8 PTO HP
- PTO RPM
- 540
- Rear lift
- 1,101 lbs
Before you buy
- TYM T254 is sub-compact. Lower rear lift often fails five-foot and heavier post hole digger classes even when engine HP looks close, and its Limited Category I hitch shows Partial on implements listed only for full Category I.
- Verified hitch: Limited Category I. Implements that name Limited Category I pass the hitch check. Implements listed only for full Category I show Partial: check the lower-link pin spacing and tower height in the tractor's operator's manual. Adapters do not add lift.
- Verified PTO rating: 18.8 PTO HP. Size PTO implements from this number — not from engine HP.
- Catalog rear lift: 1,101 lbs. Measurement point not on file. Heavier post hole digger tools need headroom over shipping weight (we screen with ~20% margin).
- No class is a confirmed fit yet: 2 Partial. Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Next step: open the Fit checker with TYM T254 and a specific post hole digger model, or read the fit guide for this implement type.
What Fit checks for this implement type
3-point post-hole diggers need hitch class, PTO shaft power, and enough lift to carry the boom. Auger diameter and soil still belong in the implement manual.
What usually fails first
PTO HP and lift on compact frames. Sub-compacts often clear only lighter diggers; utility machines handle larger augers when the sheet agrees.
How to use this hub
Match hitch and min PTO below, then screen in the Fit checker. Confirm digger and tractor OEM pages for your serial year.
On the TYM T254
On the TYM T254, no curated class is a confirmed fit yet: 2 Partial, most often on the hitch category. For 4 rows, the tractor has a Limited Category I hitch. Partial is never a confirmed fit.
Results by implement class
Land Pride PD10 Post Hole Digger
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 18.8 PTO HP meets the implement’s 15 PTO HP minimum.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (18.8) are both within the maker's 30 HP maximum for this digger.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 1101 lb lift clears ~144 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Post hole digger (compact class)
Needs a closer look- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 18.8 PTO HP meets the implement’s 15 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 1101 lb lift clears ~336 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride PD15 Post Hole Digger
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 18.8 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (18.8) are both within the maker's 40 HP maximum for this digger.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 1101 lb lift clears ~194 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride PD25 Post Hole Digger
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 18.8 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (18.8) are both within the maker's 55 HP maximum for this digger.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 1101 lb lift clears ~224 lb required (weight + 20%).
- Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.
Land Pride PD35 Post Hole Digger
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 18.8 PTO HP is below the implement’s 30 PTO HP minimum.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (18.8) are both within the maker's 75 HP maximum for this digger.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 1101 lb lift clears ~280 lb required (weight + 20%).
- Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.
Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.
Engine HP is not PTO HP. Any number we can't confirm shows as Partial. Verify it on the OEM sheet before purchase.
FAQ
- Which post hole digger classes clear on paper for the TYM T254?
- No class is a confirmed fit yet: 2 Partial (Land Pride PD10 Post Hole Digger and Post hole digger (compact class)). Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Why are 2 post hole digger rows Partial on the TYM T254?
- Land Pride PD10 Post Hole Digger and Post hole digger (compact class) are Partial because at least one number can't be confirmed yet, most often the hitch category and upper HP limit. For 4 rows, the tractor has a Limited Category I hitch. The maker's upper HP limit for 1 of these rows isn't on file yet. Partial is never a confirmed fit.
- What does Partial mean?
- Partial means one number can't be confirmed yet: a tractor Fact the check needs (PTO HP, PTO speed, hitch or rear lift) isn't on file, or the maker's upper HP limit isn't on file or isn't published. Partial also shows when only engine HP is known and it's over the maker's HP limit; when the tractor has two published PTO figures and only one is within the maker's HP limit (that can depend on the transmission version, so check which one you have); when the maker publishes different HP limits by drivetrain and this tractor is over one of them; or when the maker's own documents give two different limits. Partial is never a confirmed fit. We mark gaps instead of inventing numbers.
- Which post hole digger classes fail on the TYM T254?
- 3 class(es) fail — including Land Pride PD15 Post Hole Digger, Land Pride PD25 Post Hole Digger, and Land Pride PD35 Post Hole Digger — usually on PTO horsepower and sub-compact suitability. Those need more PTO HP than this tractor has. A smaller model or a tractor with more PTO HP may clear.
- How do I check a specific post hole digger on the TYM T254?
- Open the Attachment Fit checker with the TYM T254 and post hole digger type, open a result row below, or follow the source link on each implement.