Does a rear blade fit a John Deere 5075E?
On paper, the John Deere 5075E clears 0 of 8 curated rear blade classes in our catalog, with 0 Partial (at least one limit not confirmed) and 8 incompatible. Most common fail check: hitch category (8 of 8 classes). Checks use verified hitch/PTO overlays, lift Facts and maker-published HP limits. We never invent a number.
- compatible
- 0 compatible
- partial
- 0 partial
- incompatible
- 8 incompatible
Open in Fit checker →Implement hub →Fit guide →Tractor profile →
Verified Facts for this tractor
- Engine HP
- 73.7 HP
- Hitch
- Category II
- PTO HP
- 57.6 PTO HP
- PTO RPM
- 540
- Rear lift
- 3,192 lbs at 24 in behind hitch balls
Before you buy
- John Deere 5075E is utility class — more lift than compacts, but implement sheets and PTO still govern the buy.
- Verified hitch: Category II. Implements must list one of those categories. Adapters do not add lift.
- Verified PTO rating: 57.6 PTO HP. Size PTO implements from this number — not from engine HP.
- Catalog rear lift: 3,192 lbs at 24 in behind hitch balls. Heavier rear blade tools need headroom over shipping weight (we screen with ~20% margin).
- None of the curated rear blade classes fit on paper. Those don't list this tractor's hitch category. Hitch-rated variants may differ.
- Next step: open the Fit checker with John Deere 5075E and a specific rear blade model, or read the fit guide for this implement type.
What Fit checks for this implement type
Rear blades are typically non-PTO scraping tools. Hitch category and rear lift drive paper Fit; angle and offset kits do not raise tractor ratings.
What usually fails first
Lift capacity and hitch class on light frames. Heavier utility blades want more mass than a sub-compact can safely carry.
How to use this hub
Compare hitch and weight Facts below, then run Fit.
On the John Deere 5075E
On the John Deere 5075E, none of the 8 curated rear blade classes fit on paper — usually hitch category (e.g. 72″ rear blade (compact class)). Those don't list this tractor's hitch category. Hitch-rated variants may differ.
Results by implement class
Land Pride RB1660 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: This tractor's PTO HP (57.6) and engine HP (73.7) both exceed the maker's 40 HP maximum for this blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~340 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RB1672 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: This tractor's PTO HP (57.6) and engine HP (73.7) both exceed the maker's 40 HP maximum for this blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~357 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RB1684 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: This tractor's PTO HP (57.6) and engine HP (73.7) both exceed the maker's 40 HP maximum for this blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~383 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RB2672 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: The maker doesn't say whether its 60 HP maximum means engine or PTO HP. This tractor's engine HP (73.7) is over it; its PTO HP (57.6) is within. Ask the maker which rating applies.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~443 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RB2684 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: The maker doesn't say whether its 60 HP maximum means engine or PTO HP. This tractor's engine HP (73.7) is over it; its PTO HP (57.6) is within. Ask the maker which rating applies.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~476 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RB2696 Rear Blade
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: The maker doesn't say whether its 60 HP maximum means engine or PTO HP. This tractor's engine HP (73.7) is over it; its PTO HP (57.6) is within. Ask the maker which rating applies.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~510 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
60″ rear blade (compact class)
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~420 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
72″ rear blade (compact class)
Not a fit on paper- Hitch size: Tractor hitch (Category II) is not in the implement’s supported categories.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 3192 lb lift @ 24 in behind hitch balls clears ~504 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.
FAQ
- Which rear blade classes clear on paper for the John Deere 5075E?
- None of the 8 curated rear blade classes fit on paper. Each row names the check that fails.
- What does Partial mean?
- Partial means one number can't be confirmed yet: a tractor Fact the check needs (PTO HP, PTO speed, hitch or rear lift) isn't on file, or the maker's upper HP limit isn't on file or isn't published. Partial also shows when only engine HP is known and it's over the maker's HP limit; when the tractor has two published PTO figures and only one is within the maker's HP limit (that can depend on the transmission version, so check which one you have); when the maker publishes different HP limits by drivetrain and this tractor is over one of them; or when the maker's own documents give two different limits. Partial is never a confirmed fit. We mark gaps instead of inventing numbers.
- Which rear blade classes fail on the John Deere 5075E?
- 8 class(es) fail — including Land Pride RB1660 Rear Blade, Land Pride RB1672 Rear Blade, and Land Pride RB1684 Rear Blade — usually on hitch category and upper HP limit. Those don't list this tractor's hitch category. Hitch-rated variants may differ.
- How do I check a specific rear blade on the John Deere 5075E?
- Open the Attachment Fit checker with the John Deere 5075E and rear blade type, open a result row below, or follow the source link on each implement.