Does a box blade fit a John Deere 1025R?
On paper, the John Deere 1025R clears 0 of 11 curated box blade classes in our catalog, with 9 Partial (at least one limit not confirmed) and 2 incompatible. Most common fail check: sub-compact suitability (2 of 11 classes). Checks use verified hitch/PTO overlays, lift Facts and maker-published HP limits. We never invent a number.
- compatible
- 0 compatible
- partial
- 9 partial
- incompatible
- 2 incompatible
Open in Fit checker →Implement hub →Fit guide →Tractor profile →
Verified Facts for this tractor
- Engine HP
- 23.9 HP
- Hitch
- Limited Category I
- PTO HP
- 17.2 PTO HP
- PTO RPM
- 540
- Rear lift
- 758 lbs
Before you buy
- John Deere 1025R is sub-compact. Lower rear lift often fails five-foot and heavier box blade classes even when engine HP looks close, and its Limited Category I hitch shows Partial on implements listed only for full Category I.
- Verified hitch: Limited Category I. Implements that name Limited Category I pass the hitch check. Implements listed only for full Category I show Partial: check the lower-link pin spacing and tower height in the tractor's operator's manual. Adapters do not add lift.
- Verified PTO rating: 17.2 PTO HP. Size PTO implements from this number — not from engine HP.
- Catalog rear lift: 758 lbs. Measurement point not on file. Heavier box blade tools need headroom over shipping weight (we screen with ~20% margin).
- No class is a confirmed fit yet: 9 Partial. Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Next step: open the Fit checker with John Deere 1025R and a specific box blade model, or read the fit guide for this implement type.
What Fit checks for this implement type
Box blades (box scrapers) are usually non-PTO grading tools. Fit centers on hitch category and rear lift capacity.
What usually fails first
Lift and hitch class, not PTO. A blade that pins can still overload a light sub-compact on a crowned driveway. Watch shipping weight versus rear lift.
How to use this hub
Use the curated weights and hitch lists below, then Fit-check your tractor.
On the John Deere 1025R
On the John Deere 1025R, no curated class is a confirmed fit yet: 9 Partial, most often on the hitch category. For 9 rows, the tractor has a Limited Category I hitch. Partial is never a confirmed fit.
Results by implement class
Land Pride BB1248 Box Scraper
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~380 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride BB1254 Box Scraper
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~390 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride BB1260 Box Scraper
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~416 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride BB1266 Box Scraper
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~444 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Land Pride BB1272 Box Scraper
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~485 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Bush Hog BBX48 Box Blade
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~312 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Bush Hog BBX60 Box Blade
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~390 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
48″ box blade (compact class)
Needs a closer look- Hitch size: Limited Category I matches implement hitch options.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~384 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
60″ box blade (compact class)
Needs a closer look- Hitch size: Limited Category I matches implement hitch options.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~576 lb required (weight + 20%).
- Sub-compact size: Implement is marked suitable for sub-compact geometry.
Bush Hog BBX72 Box Blade
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (17.2) are both within the maker's 30 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~468 lb required (weight + 20%).
- Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.
Bush Hog SBX60 Box Blade
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: Implement does not require PTO horsepower.
- Upper HP limit: Tractor PTO HP 17.2 is within the maker's 35 HP maximum for this box blade.
- PTO speed: Implement does not require a PTO RPM match.
- Rear lift capacity: 758 lb lift clears ~588 lb required (weight + 20%).
- Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.
Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.
Engine HP is not PTO HP. Any number we can't confirm shows as Partial. Verify it on the OEM sheet before purchase.
FAQ
- Which box blade classes clear on paper for the John Deere 1025R?
- No class is a confirmed fit yet: 9 Partial (Land Pride BB1248 Box Scraper, Land Pride BB1254 Box Scraper, and Land Pride BB1260 Box Scraper). Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Why are 9 box blade rows Partial on the John Deere 1025R?
- Land Pride BB1248 Box Scraper, Land Pride BB1254 Box Scraper, and Land Pride BB1260 Box Scraper are Partial because at least one number can't be confirmed yet, most often the hitch category and upper HP limit. For 9 rows, the tractor has a Limited Category I hitch. The maker's upper HP limit for 2 of these rows isn't on file yet. Partial is never a confirmed fit.
- What does Partial mean?
- Partial means one number can't be confirmed yet: a tractor Fact the check needs (PTO HP, PTO speed, hitch or rear lift) isn't on file, or the maker's upper HP limit isn't on file or isn't published. Partial also shows when only engine HP is known and it's over the maker's HP limit; when the tractor has two published PTO figures and only one is within the maker's HP limit (that can depend on the transmission version, so check which one you have); when the maker publishes different HP limits by drivetrain and this tractor is over one of them; or when the maker's own documents give two different limits. Partial is never a confirmed fit. We mark gaps instead of inventing numbers.
- Which box blade classes fail on the John Deere 1025R?
- 2 class(es) fail — including Bush Hog BBX72 Box Blade and Bush Hog SBX60 Box Blade — usually on sub-compact suitability. Those aren't marked for sub-compact frames.
- How do I check a specific box blade on the John Deere 1025R?
- Open the Attachment Fit checker with the John Deere 1025R and box blade type, open a result row below, or follow the source link on each implement.