Which is better — John Deere 5095M or Solis S90?

John Deere 5095M lists higher engine horsepower (95 vs 90 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. John Deere 5095M is heavier (8,763 vs 7,297 lb operating weight) — usually more stability and traction; Solis S90 stays easier to maneuver in tight yards. Choose John Deere 5095M when you need more frame mass (8,763 vs 7,297 lb) for traction and stability. Choose Solis S90 when you need more rear lift (5,512 vs 5,150 lb @ 24″) for heavier three-point tools, or lower operating weight (7,297 vs 8,763 lb) for tight yards. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.

Are these numbers invented?

No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.

How do I check attachments?

Open the Fit checker with John Deere 5095M or Solis S90, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.

John Deere 5095M vs Solis S90

Both sit in the Utility class with similar engine horsepower (95 vs 90 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.

Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.

John Deere 5095M Profile →Solis S90 Profile →Fit checker →

How to choose

John Deere 5095M lists higher engine horsepower (95 vs 90 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers.
John Deere 5095M is heavier (8,763 vs 7,297 lb operating weight) — usually more stability and traction; Solis S90 stays easier to maneuver in tight yards.
Solis S90 has more rear lift (5,512 vs 5,150 lb @ 24″) — more headroom for heavier three-point tools. John Deere 5095M needs lighter implements or stricter ballast discipline.
John Deere 5095M has verified 80 PTO HP; Solis S90 is missing that Fact — look it up on the OEM sheet before comparing PTO implements.
Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.

When to pick each

Choose John Deere 5095M when you need more frame mass (8,763 vs 7,297 lb) for traction and stability.

Choose Solis S90 when you need more rear lift (5,512 vs 5,150 lb @ 24″) for heavier three-point tools, or lower operating weight (7,297 vs 8,763 lb) for tight yards.

Spec comparison

Spec	John Deere 5095M	Solis S90
Size class	Utility	Utility
Engine horsepower	95 HP	90 HP
Operating weight	8,763 lbs	7,297 lbs
Rear hitch lift @ 24″	5,150 lbs @ 24″	5,512 lbs @ 24″
Hitch category	Category II	—
PTO horsepower	80 PTO HP	—
PTO RPM	540 RPM	—

Sources

FAQ

Which is better — John Deere 5095M or Solis S90?: John Deere 5095M lists higher engine horsepower (95 vs 90 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. John Deere 5095M is heavier (8,763 vs 7,297 lb operating weight) — usually more stability and traction; Solis S90 stays easier to maneuver in tight yards. Choose John Deere 5095M when you need more frame mass (8,763 vs 7,297 lb) for traction and stability. Choose Solis S90 when you need more rear lift (5,512 vs 5,150 lb @ 24″) for heavier three-point tools, or lower operating weight (7,297 vs 8,763 lb) for tight yards. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
Are these numbers invented?: No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
How do I check attachments?: Open the Fit checker with John Deere 5095M or Solis S90, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.