John Deere 5090M vs Solis S90
Both sit in the Utility class with similar engine horsepower (90 vs 90 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- Engine horsepower is essentially even (90 HP) — decide on lift, PTO, and implements, not the hood number alone.
- John Deere 5090M is heavier (8,763 vs 7,297 lb operating weight) — usually more stability and traction; Solis S90 stays easier to maneuver in tight yards.
- John Deere 5090M has more rear lift (6,751 vs 5,512 lb @ 24″) — more headroom for heavier three-point tools. Solis S90 needs lighter implements or stricter ballast discipline.
- John Deere 5090M has verified 75 PTO HP; Solis S90 is missing that Fact — look it up on the OEM sheet before comparing PTO implements.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose John Deere 5090M when you need more rear lift (6,751 vs 5,512 lb @ 24″) for heavier three-point tools, or more frame mass (8,763 vs 7,297 lb) for traction and stability.
Choose Solis S90 when you need lower operating weight (7,297 vs 8,763 lb) for tight yards.
Spec comparison
| Spec | John Deere 5090M | Solis S90 |
|---|---|---|
| Size class | Utility | Utility |
| Engine horsepower | 90 HP | 90 HP |
| Operating weight | 8,763 lbs | 7,297 lbs |
| Rear hitch lift @ 24″ | 6,751 lbs @ 24″ | 5,512 lbs @ 24″ |
| Hitch category | Category II | — |
| PTO horsepower | 75 PTO HP | — |
| PTO RPM | 540 RPM | — |
Sources
FAQ
- Which is better — John Deere 5090M or Solis S90?
- Engine horsepower is essentially even (90 HP) — decide on lift, PTO, and implements, not the hood number alone. John Deere 5090M is heavier (8,763 vs 7,297 lb operating weight) — usually more stability and traction; Solis S90 stays easier to maneuver in tight yards. Choose John Deere 5090M when you need more rear lift (6,751 vs 5,512 lb @ 24″) for heavier three-point tools, or more frame mass (8,763 vs 7,297 lb) for traction and stability. Choose Solis S90 when you need lower operating weight (7,297 vs 8,763 lb) for tight yards. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with John Deere 5090M or Solis S90, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.