Does a finish mower fit a Solis H26?

On paper, the Solis H26 clears 0 of 10 curated finish mower classes in our catalog, with 4 Partial (missing Fact) and 6 incompatible. Most common fail check: sub-compact suitability (6 of 10 classes). Checks use verified hitch/PTO overlays and lift Facts — we never invent PTO horsepower.

compatible
0 compatible
partial
4 partial
incompatible
6 incompatible

Open in Fit checker →Implement hub →Fit guide →Tractor profile →

Verified Facts for this tractor

Engine HP
26 HP
Hitch
Fact missing
PTO HP
Fact missing — Partial
PTO RPM
Rear lift
1,323 lbs @ 24″

Before you buy

  • Solis H26 is sub-compact — Limited Category I and lower lift often fail five-foot and heavier finish mower classes even when engine HP “looks close.”
  • Hitch category for Solis H26 is not yet on file as a Fact — read the OEM sheet before buying wide finish mower tools.
  • PTO horsepower is missing as a Fact — Partial rows below mean “look it up,” not “probably fine.” We never invent shaft ratings.
  • Catalog rear lift: 1,323 lb @ 24″. Heavier finish mower tools need headroom over shipping weight (we screen with ~20% margin).
  • No full Compatible row yet: 4 Partial. Resolve missing Facts on the OEM sheet, then re-check.
  • Next step: open the Fit checker with Solis H26 and a specific finish mower model, or read the fit guide for this implement type.

What Fit checks for this implement type

Finish mowers cut turf with PTO power and a three-point (or mid-mount) hitch. Fit is hitch, PTO HP/RPM, and lift — plus turf-friendly geometry on sub-compacts.

What usually fails first

PTO minimums and deck weight versus lift. Wide finish decks can clear hitch but fail lift or sub-compact suitability notes.

How to use this hub

Pick a curated deck class, Fit-check your tractor, then verify the mower OEM sheet. Engine HP alone is not enough.

On the Solis H26

On the Solis H26, there is no full Compatible row yet: 4 Partial — typically missing hitch category. Engine HP is not a substitute for shaft Facts.

Results by implement class

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~584 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~693 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Full fit page →Source

  • Bush Hog HDTH5 Finish Mower

    Needs a closer look
    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~807 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~648 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~743 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~862 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 15 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~975 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

  • Bush Hog HDTH6 Finish Mower

    Not a fit on paper
    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 20 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~876 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

  • Bush Hog HDTH7 Finish Mower

    Not a fit on paper
    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 30 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~1145 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

    • Hitch size: Hitch category not yet verified for this tractor — confirm on the OEM sheet.
    • PTO power: Needs ≥ 20 PTO HP — tractor PTO Fact not yet on file (engine HP is not a substitute).
    • PTO speed: Needs 540 RPM PTO — tractor PTO RPM not yet on file.
    • Rear lift capacity: 1323 lb lift @ 24″ clears ~840 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Full fit page →Source

Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.

Engine horsepower is not PTO horsepower. Missing Facts show as Partial — verify on the OEM sheet before purchase.

FAQ

Which finish mower classes clear on paper for the Solis H26?
No full Compatible row yet: 4 Partial (Land Pride FDR1648 Grooming Mower, Land Pride FDR1660 Grooming Mower, and Bush Hog HDTH5 Finish Mower). Resolve missing Facts first, then re-check.
Why are 4 finish mower rows Partial on the Solis H26?
Land Pride FDR1648 Grooming Mower, Land Pride FDR1660 Grooming Mower, and Bush Hog HDTH5 Finish Mower are Partial because at least one Fact is missing — typically hitch category, PTO horsepower, and PTO RPM. Engine HP is not a substitute; we never invent shaft ratings.
Which finish mower classes fail on the Solis H26?
6 class(es) fail — including Land Pride FDR1672 Grooming Mower, Land Pride FDR2572 Grooming Mower, and Land Pride FDR2584 Grooming Mower — usually on sub-compact suitability. Narrower tools or hitch-rated variants may differ.
How do I check a specific finish mower on the Solis H26?
Open the Attachment Fit checker with the Solis H26 and finish mower type, open a result row below, or follow the source link on each implement.

Next steps

Other implements for this tractor

Does a finish mower fit a Solis H26? | Machinery Intel