Does a finish mower fit a Kubota BX2380? (1/10)

On paper, the Kubota BX2380 clears 1 of 10 curated finish mower classes in our catalog, with 1 Partial (at least one limit not confirmed) and 8 incompatible. Clearing classes include Land Pride FDR1648 Grooming Mower. Most common fail check: rear lift (8 of 10 classes). Checks use verified hitch/PTO overlays, lift Facts and maker-published HP limits. We never invent a number.

compatible
1 compatible
partial
1 partial
incompatible
8 incompatible

Open in Fit checker →Implement hub →Fit guide →Tractor profile →

Verified Facts for this tractor

Engine HP
21.6 HP
Hitch
Category I
PTO HP
17.7 PTO HP
PTO RPM
540
Rear lift
680 lbs

Before you buy

  • Kubota BX2380 is sub-compact. Lower rear lift often fails five-foot and heavier finish mower classes even when engine HP looks close.
  • Verified hitch: Category I. Implements must list one of those categories. Adapters do not add lift.
  • Verified PTO rating: 17.7 PTO HP. Size PTO implements from this number — not from engine HP.
  • Catalog rear lift: 680 lbs. Measurement point not on file. Heavier finish mower tools need headroom over shipping weight (we screen with ~20% margin).
  • 1 curated class(es) clear on paper, including the maker's upper HP limit. Still confirm serial-year OEM sheets and ballast.
  • Next step: open the Fit checker with Kubota BX2380 and a specific finish mower model, or read the fit guide for this implement type.

What Fit checks for this implement type

Finish mowers cut turf with PTO power and a three-point (or mid-mount) hitch. Fit is hitch, PTO HP/RPM, and lift — plus turf-friendly geometry on sub-compacts.

What usually fails first

PTO minimums and deck weight versus lift. Wide finish decks can clear hitch but fail lift or sub-compact suitability notes.

How to use this hub

Pick a curated deck class, Fit-check your tractor, then verify the mower OEM sheet. Engine HP alone is not enough.

On the Kubota BX2380

On the Kubota BX2380, 1 of 10 curated finish mower classes clear — including Land Pride FDR1648 Grooming Mower. Failures often trace to rear lift. Clearing classes stay within the maker's published upper HP limit. Still confirm serial-year OEM sheets.

Results by implement class

  • Land Pride FDR1648 Grooming Mower

    Looks like a fit on paper
    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor engine HP 21.6 is within the maker's 40 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift clears ~584 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift clears ~648 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor engine HP 21.6 is within the maker's 40 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~693 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor engine HP 21.6 is within the maker's 40 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~743 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor engine HP 21.6 is within the maker's 60 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~862 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor engine HP 21.6 is within the maker's 60 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~975 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

  • Bush Hog HDTH5 Finish Mower

    Not a fit on paper
    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP meets the implement’s 15 PTO HP minimum.
    • Upper HP limit: Tractor PTO HP 17.7 is within the maker's 35 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~807 lb required (weight + 20%).
    • Sub-compact size: Implement is marked suitable for sub-compact geometry.

    Open in Fit checker →Source →

  • Bush Hog HDTH6 Finish Mower

    Not a fit on paper
    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP is below the implement’s 20 PTO HP minimum.
    • Upper HP limit: Tractor PTO HP 17.7 is within the maker's 40 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~876 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

  • Bush Hog HDTH7 Finish Mower

    Not a fit on paper
    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP is below the implement’s 30 PTO HP minimum.
    • Upper HP limit: Tractor PTO HP 17.7 is within the maker's 55 HP maximum for this mower.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~1145 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

    • Hitch size: Category I matches implement hitch options.
    • PTO power: 17.7 PTO HP is below the implement’s 20 PTO HP minimum.
    • Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
    • PTO speed: 540 RPM PTO matches the implement.
    • Rear lift capacity: 680 lb lift is below ~840 lb required (weight + 20%).
    • Sub-compact size: Implement is not marked suitable for sub-compact hitch geometry / frame size.

    Open in Fit checker →Source →

Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.

Engine HP is not PTO HP. Any number we can't confirm shows as Partial. Verify it on the OEM sheet before purchase.

FAQ

Which finish mower classes clear on paper for the Kubota BX2380?
1 of 10 curated classes pass hitch, PTO, lift and the maker's upper HP limit, including Land Pride FDR1648 Grooming Mower. Still confirm serial-year OEM sheets.
Why are 1 finish mower rows Partial on the Kubota BX2380?
60″ finish mower (compact class) are Partial because at least one number can't be confirmed yet, most often the upper HP limit. The maker's upper HP limit for 2 of these rows isn't on file yet. Partial is never a confirmed fit.
What does Partial mean?
Partial means one number can't be confirmed yet: a tractor Fact the check needs (PTO HP, PTO speed, hitch or rear lift) isn't on file, or the maker's upper HP limit isn't on file or isn't published. Partial also shows when only engine HP is known and it's over the maker's HP limit; when the tractor has two published PTO figures and only one is within the maker's HP limit (that can depend on the transmission version, so check which one you have); when the maker publishes different HP limits by drivetrain and this tractor is over one of them; or when the maker's own documents give two different limits. Partial is never a confirmed fit. We mark gaps instead of inventing numbers.
Which finish mower classes fail on the Kubota BX2380?
8 class(es) fail — including Land Pride FDR1660 Grooming Mower, Land Pride FDR1672 Grooming Mower, and Land Pride FDR2572 Grooming Mower — usually on rear lift, sub-compact suitability, and PTO horsepower. Those are too heavy for this tractor's rear lift. A narrower or lighter model may clear.
Why does Land Pride FDR1648 Grooming Mower clear when Land Pride FDR1660 Grooming Mower fails on the Kubota BX2380?
Land Pride FDR1648 Grooming Mower passes hitch, PTO, lift and the maker's HP limit with published Facts; Land Pride FDR1660 Grooming Mower fails on rear lift. That is a class-sheet difference, not “about the same engine HP.”
How do I check a specific finish mower on the Kubota BX2380?
Open the Attachment Fit checker with the Kubota BX2380 and finish mower type, open a result row below, or follow the source link on each implement.

Next steps

Other models for this attachment type

Other implements for this tractor