Does a rotary cutter fit a John Deere 2025R?
On paper, the John Deere 2025R clears 0 of 24 curated rotary cutter classes in our catalog, with 3 Partial (at least one limit not confirmed) and 21 incompatible. Most common fail check: PTO horsepower (21 of 24 classes). Checks use verified hitch/PTO overlays, lift Facts and maker-published HP limits. We never invent a number.
- compatible
- 0 compatible
- partial
- 3 partial
- incompatible
- 21 incompatible
Open in Fit checker →Implement hub →Fit guide →Tractor profile →
Verified Facts for this tractor
- Engine HP
- 23.9 HP
- Hitch
- Limited Category I
- PTO HP
- 17.2 PTO HP
- PTO RPM
- 540
- Rear lift
- 915 lbs at 24 in behind lift point
Before you buy
- John Deere 2025R is compact class — most property rotary cutter sheets target Category I; verify Limited Cat I or sub-compact callouts separately.
- Verified hitch: Limited Category I. Implements that name Limited Category I pass the hitch check. Implements listed only for full Category I show Partial: check the lower-link pin spacing and tower height in the tractor's operator's manual. Adapters do not add lift.
- Verified PTO rating: 17.2 PTO HP. Size PTO implements from this number — not from engine HP.
- Catalog rear lift: 915 lbs at 24 in behind lift point. Heavier rotary cutter tools need headroom over shipping weight (we screen with ~20% margin).
- No class is a confirmed fit yet: 3 Partial. Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Next step: open the Fit checker with John Deere 2025R and a specific rotary cutter model, or read the fit guide for this implement type.
What Fit checks for this implement type
Rotary cutters (bush hogs) are PTO-driven brush decks. Fit is hitch class, minimum PTO shaft horsepower, PTO RPM, rear lift and the cutter maker's upper HP limit, not the tractor's marketing engine rating.
What usually fails first
On sub-compacts, check rear lift first: it can fail even when engine HP looks close. A Limited Category I hitch on a cutter listed only for full Category I shows Partial: check the lower-link pin spacing and tower height in the tractor's operator's manual. If Fit says Partial, the row names the number we can't confirm, often the tractor's PTO HP or the cutter maker's upper HP limit. We never invent ratings.
How to use this hub
Scan curated cutter classes below for hitch list, min PTO, and weight. Open the Attachment Fit checker with your tractor, or jump to a type Fit page for an example machine. Finish with serial-year OEM manuals.
On the John Deere 2025R
On the John Deere 2025R, no curated class is a confirmed fit yet: 3 Partial, most often on the upper HP limit. The maker's upper HP limit for 21 of these rows isn't on file yet. Partial is never a confirmed fit.
Results by implement class
Woods BB48X BrushBull Rotary Cutter
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP meets the implement’s 15 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~598 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH114 Rotary Cutter
Needs a closer look- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP meets the implement’s 15 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~472 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
48″ rotary cutter (compact class)
Needs a closer look- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 17.2 PTO HP meets the implement’s 15 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~540 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RCR1242 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 17.2 PTO HP is below the implement’s 18 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~462 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RCR1248 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 17.2 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~496 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RCR1260 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 17.2 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Tractor engine HP (23.9) and PTO HP (18.2) are both within the maker's 60 HP maximum for this cutter.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~596 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RCR1272 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~682 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Land Pride RCR1548 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I matches implement hitch options.
- PTO power: 17.2 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~509 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB600X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 30 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1282 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB60X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~725 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB720X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 30 PTO HP minimum.
- Upper HP limit: Even the tractor's higher published PTO figure (18.2 HP) is within the maker's 120 HP maximum for this cutter.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1440 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB72X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 30 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~994 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB840X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 40 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1700 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Woods BB84X BrushBull Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 35 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1301 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH115 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~590 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH116 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~693 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH215-2 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~780 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH216-2 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 30 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~900 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH217-2 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 50 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1242 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH315-2 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 35 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1068 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH316-2 Rotary Cutter
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 45 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1260 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Bush Hog BH317-2 Rotary Cutter
Not a fit on paper- Hitch size: Tractor hitch (Limited Category I) is not in the implement’s supported categories.
- PTO power: 17.2 PTO HP is below the implement’s 55 PTO HP minimum.
- Upper HP limit: The maker doesn't list a maximum tractor horsepower for this model.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1500 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
60″ rotary cutter (compact class)
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 20 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point clears ~840 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
72″ rotary cutter (compact class)
Not a fit on paper- Hitch size: Limited Category I hitch: Cat I pins fit, but check the implement's lower-link pin spacing and tower height against the tractor's operator's manual.
- PTO power: 17.2 PTO HP is below the implement’s 25 PTO HP minimum.
- Upper HP limit: Upper HP limit not on file yet — check the maker's sheet.
- PTO speed: 540 RPM PTO matches the implement.
- Rear lift capacity: 915 lb lift @ 24 in behind lift point is below ~1140 lb required (weight + 20%).
- Sub-compact size: Sub-compact geometry check not applicable.
Attachment numbers come from the manufacturer specification sheet linked below. Confirm your serial year before purchase.
Engine HP is not PTO HP. Any number we can't confirm shows as Partial. Verify it on the OEM sheet before purchase.
FAQ
- Which rotary cutter classes clear on paper for the John Deere 2025R?
- No class is a confirmed fit yet: 3 Partial (Woods BB48X BrushBull Rotary Cutter, Bush Hog BH114 Rotary Cutter, and 48″ rotary cutter (compact class)). Each Partial row names the number we couldn't confirm. Check it on the maker's sheet, then re-check.
- Why are 3 rotary cutter rows Partial on the John Deere 2025R?
- Woods BB48X BrushBull Rotary Cutter, Bush Hog BH114 Rotary Cutter, and 48″ rotary cutter (compact class) are Partial because at least one number can't be confirmed yet, most often the hitch category and upper HP limit. The maker's upper HP limit for 21 of these rows isn't on file yet. For 18 rows, the tractor has a Limited Category I hitch. Partial is never a confirmed fit.
- What does Partial mean?
- Partial means one number can't be confirmed yet: a tractor Fact the check needs (PTO HP, PTO speed, hitch or rear lift) isn't on file, or the maker's upper HP limit isn't on file or isn't published. Partial also shows when only engine HP is known and it's over the maker's HP limit; when the tractor has two published PTO figures and only one is within the maker's HP limit (that can depend on the transmission version, so check which one you have); when the maker publishes different HP limits by drivetrain and this tractor is over one of them; or when the maker's own documents give two different limits. Partial is never a confirmed fit. We mark gaps instead of inventing numbers.
- Which rotary cutter classes fail on the John Deere 2025R?
- 21 class(es) fail — including Land Pride RCR1242 Rotary Cutter, Land Pride RCR1248 Rotary Cutter, and Land Pride RCR1260 Rotary Cutter — usually on PTO horsepower, rear lift, and hitch category. Those need more PTO HP than this tractor has. A smaller model or a tractor with more PTO HP may clear.
- How do I check a specific rotary cutter on the John Deere 2025R?
- Open the Attachment Fit checker with the John Deere 2025R and rotary cutter type, open a result row below, or follow the source link on each implement.