John Deere 5075M vs Solis S75
Both sit in the Utility class with similar engine horsepower (75 vs 75 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- Engine horsepower is essentially even (75 HP) — decide on lift, PTO, and implements, not the hood number alone.
- John Deere 5075M is heavier (8,765 vs 7,231 lb operating weight) — usually more stability and traction; Solis S75 stays easier to maneuver in tight yards.
- Solis S75 has more rear lift (5,512 vs 5,150 lb @ 24″) — more headroom for heavier three-point tools. John Deere 5075M needs lighter implements or stricter ballast discipline.
- John Deere 5075M has verified 57.7 PTO HP; Solis S75 is missing that Fact — look it up on the OEM sheet before comparing PTO implements.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose John Deere 5075M when you need more frame mass (8,765 vs 7,231 lb) for traction and stability.
Choose Solis S75 when you need more rear lift (5,512 vs 5,150 lb @ 24″) for heavier three-point tools, or lower operating weight (7,231 vs 8,765 lb) for tight yards.
Spec comparison
| Spec | John Deere 5075M | Solis S75 |
|---|---|---|
| Size class | Utility | Utility |
| Engine horsepower | 75 HP | 75 HP |
| Operating weight | 8,765 lbs | 7,231 lbs |
| Rear hitch lift @ 24″ | 5,150 lbs @ 24″ | 5,512 lbs @ 24″ |
| Hitch category | Category II | — |
| PTO horsepower | 57.7 PTO HP | — |
| PTO RPM | 540 RPM | — |
Sources
FAQ
- Which is better — John Deere 5075M or Solis S75?
- Engine horsepower is essentially even (75 HP) — decide on lift, PTO, and implements, not the hood number alone. John Deere 5075M is heavier (8,765 vs 7,231 lb operating weight) — usually more stability and traction; Solis S75 stays easier to maneuver in tight yards. Choose John Deere 5075M when you need more frame mass (8,765 vs 7,231 lb) for traction and stability. Choose Solis S75 when you need more rear lift (5,512 vs 5,150 lb @ 24″) for heavier three-point tools, or lower operating weight (7,231 vs 8,765 lb) for tight yards. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with John Deere 5075M or Solis S75, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.