John Deere 1M-25 vs Kubota B2601
Both sit in the Sub-Compact class with similar engine horsepower (24 vs 24.3 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
John Deere 1M-25 Profile →Kubota B2601 Profile →Fit checker →
How to choose
- Engine horsepower is essentially even (24 HP) — decide on lift, PTO, and implements, not the hood number alone.
- Kubota B2601 is heavier (1,632 vs 1,556 lb operating weight) — usually more stability and traction; John Deere 1M-25 stays easier to maneuver in tight yards.
- Kubota B2601 has more rear lift (1,411 vs 758 lb @ 24″) — more headroom for heavier three-point tools. John Deere 1M-25 needs lighter implements or stricter ballast discipline.
- Hitch differs: John Deere 1M-25 (Limited Category I) vs Kubota B2601 (Category I). Implement sheets must name the matching class — adapters do not add lift.
- Kubota B2601 has the higher verified PTO rating (19.4 vs 18.2 PTO HP) — that is the Fact for cutters, tillers, and snow blowers, not engine HP.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose John Deere 1M-25 when you need lower operating weight (1,556 vs 1,632 lb) for tight yards, or implement sheets that explicitly list Limited Category I.
Choose Kubota B2601 when you need more rear lift (1,411 vs 758 lb @ 24″) for heavier three-point tools, higher verified PTO (19.4 vs 18.2 PTO HP) for cutters, tillers, or snow blowers, more frame mass (1,632 vs 1,556 lb) for traction and stability, or implement sheets that explicitly list Category I.
Spec comparison
| Spec | John Deere 1M-25 | Kubota B2601 |
|---|---|---|
| Size class | Sub-Compact | Sub-Compact |
| Engine horsepower | 24 HP | 24.3 HP |
| Operating weight | 1,556 lbs | 1,632 lbs |
| Rear hitch lift @ 24″ | 758 lbs @ 24″ | 1,411 lbs @ 24″ |
| Hitch category | Limited Category I | Category I |
| PTO horsepower | 18.2 PTO HP | 19.4 PTO HP |
| PTO RPM | 540 RPM | 540 RPM |
Sources
FAQ
- Which is better — John Deere 1M-25 or Kubota B2601?
- Engine horsepower is essentially even (24 HP) — decide on lift, PTO, and implements, not the hood number alone. Kubota B2601 is heavier (1,632 vs 1,556 lb operating weight) — usually more stability and traction; John Deere 1M-25 stays easier to maneuver in tight yards. Choose John Deere 1M-25 when you need lower operating weight (1,556 vs 1,632 lb) for tight yards, or implement sheets that explicitly list Limited Category I. Choose Kubota B2601 when you need more rear lift (1,411 vs 758 lb @ 24″) for heavier three-point tools, higher verified PTO (19.4 vs 18.2 PTO HP) for cutters, tillers, or snow blowers, more frame mass (1,632 vs 1,556 lb) for traction and stability, or implement sheets that explicitly list Category I. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with John Deere 1M-25 or Kubota B2601, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.