Solis S26 vs TYM T224
Both sit in the Sub-Compact class with similar engine horsepower (26 vs 21.5 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- Solis S26 lists higher engine horsepower (26 vs 21.5 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers.
- Solis S26 is heavier (2,359 vs 1,472 lb operating weight) — usually more stability and traction; TYM T224 stays easier to maneuver in tight yards.
- Solis S26 has more rear lift (1,323 vs 679 lb @ 24″) — more headroom for heavier three-point tools. TYM T224 needs lighter implements or stricter ballast discipline.
- Hitch differs: Solis S26 (Category I) vs TYM T224 (Limited Category I). Implement sheets must name the matching class — adapters do not add lift.
- TYM T224 has verified 15.1 PTO HP; Solis S26 is missing that Fact — look it up on the OEM sheet before comparing PTO implements.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose Solis S26 when you need more rear lift (1,323 vs 679 lb @ 24″) for heavier three-point tools, more frame mass (2,359 vs 1,472 lb) for traction and stability, or implement sheets that explicitly list Category I.
Choose TYM T224 when you need lower operating weight (1,472 vs 2,359 lb) for tight yards, or implement sheets that explicitly list Limited Category I.
Spec comparison
Sources
FAQ
- Which is better — Solis S26 or TYM T224?
- Solis S26 lists higher engine horsepower (26 vs 21.5 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. Solis S26 is heavier (2,359 vs 1,472 lb operating weight) — usually more stability and traction; TYM T224 stays easier to maneuver in tight yards. Choose Solis S26 when you need more rear lift (1,323 vs 679 lb @ 24″) for heavier three-point tools, more frame mass (2,359 vs 1,472 lb) for traction and stability, or implement sheets that explicitly list Category I. Choose TYM T224 when you need lower operating weight (1,472 vs 2,359 lb) for tight yards, or implement sheets that explicitly list Limited Category I. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with Solis S26 or TYM T224, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.