LS Tractor MT125 vs TYM T254
Both sit in the Sub-Compact class with similar engine horsepower (24.7 vs 23.9 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- LS Tractor MT125 lists higher engine horsepower (24.7 vs 23.9 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers.
- The gap vs TYM T254 is small (~0.8 HP) — rear lift or hitch class often matter more day to day.
- TYM T254 is heavier (1,638 vs 1,444 lb operating weight) — usually more stability and traction; LS Tractor MT125 stays easier to maneuver in tight yards.
- TYM T254 has more rear lift (1,101 vs 728 lb @ 24″) — more headroom for heavier three-point tools. LS Tractor MT125 needs lighter implements or stricter ballast discipline.
- Hitch differs: LS Tractor MT125 (Category I) vs TYM T254 (Limited Category I). Implement sheets must name the matching class — adapters do not add lift.
- TYM T254 has the higher verified PTO rating (18.8 vs 17.2 PTO HP) — that is the Fact for cutters, tillers, and snow blowers, not engine HP.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose LS Tractor MT125 when you need lower operating weight (1,444 vs 1,638 lb) for tight yards, or implement sheets that explicitly list Category I.
Choose TYM T254 when you need more rear lift (1,101 vs 728 lb @ 24″) for heavier three-point tools, higher verified PTO (18.8 vs 17.2 PTO HP) for cutters, tillers, or snow blowers, more frame mass (1,638 vs 1,444 lb) for traction and stability, or implement sheets that explicitly list Limited Category I.
Spec comparison
| Spec | LS Tractor MT125 | TYM T254 |
|---|---|---|
| Size class | Sub-Compact | Sub-Compact |
| Engine horsepower | 24.7 HP | 23.9 HP |
| Operating weight | 1,444 lbs | 1,638 lbs |
| Rear hitch lift @ 24″ | 728 lbs @ 24″ | 1,101 lbs @ 24″ |
| Hitch category | Category I | Limited Category I |
| PTO horsepower | 17.2 PTO HP | 18.8 PTO HP |
| PTO RPM | 540 RPM | 540 RPM |
Sources
FAQ
- Which is better — LS Tractor MT125 or TYM T254?
- LS Tractor MT125 lists higher engine horsepower (24.7 vs 23.9 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. The gap vs TYM T254 is small (~0.8 HP) — rear lift or hitch class often matter more day to day. Choose LS Tractor MT125 when you need lower operating weight (1,444 vs 1,638 lb) for tight yards, or implement sheets that explicitly list Category I. Choose TYM T254 when you need more rear lift (1,101 vs 728 lb @ 24″) for heavier three-point tools, higher verified PTO (18.8 vs 17.2 PTO HP) for cutters, tillers, or snow blowers, more frame mass (1,638 vs 1,444 lb) for traction and stability, or implement sheets that explicitly list Limited Category I. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with LS Tractor MT125 or TYM T254, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.