John Deere 4044M vs TYM T474
Both sit in the Compact class with similar engine horsepower (43.1 vs 48.3 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- TYM T474 lists higher engine horsepower (48.3 vs 43.1 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers.
- John Deere 4044M is heavier (3,770 vs 3,289 lb operating weight) — usually more stability and traction; TYM T474 stays easier to maneuver in tight yards.
- John Deere 4044M has more rear lift (2,500 vs 1,764 lb @ 24″) — more headroom for heavier three-point tools. TYM T474 needs lighter implements or stricter ballast discipline.
- Both list Category I — hitch class alone does not settle the matchup; lift and PTO still decide implement fit.
- TYM T474 has the higher verified PTO rating (35.9 vs 33.6 PTO HP) — that is the Fact for cutters, tillers, and snow blowers, not engine HP.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose John Deere 4044M when you need more rear lift (2,500 vs 1,764 lb @ 24″) for heavier three-point tools, or more frame mass (3,770 vs 3,289 lb) for traction and stability.
Choose TYM T474 when you need higher verified PTO (35.9 vs 33.6 PTO HP) for cutters, tillers, or snow blowers, or lower operating weight (3,289 vs 3,770 lb) for tight yards.
Spec comparison
| Spec | John Deere 4044M | TYM T474 |
|---|---|---|
| Size class | Compact | Compact |
| Engine horsepower | 43.1 HP | 48.3 HP |
| Operating weight | 3,770 lbs | 3,289 lbs |
| Rear hitch lift @ 24″ | 2,500 lbs @ 24″ | 1,764 lbs @ 24″ |
| Hitch category | Category I | Category I |
| PTO horsepower | 33.6 PTO HP | 35.9 PTO HP |
| PTO RPM | 540 RPM | 540 RPM |
Sources
FAQ
- Which is better — John Deere 4044M or TYM T474?
- TYM T474 lists higher engine horsepower (48.3 vs 43.1 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. John Deere 4044M is heavier (3,770 vs 3,289 lb operating weight) — usually more stability and traction; TYM T474 stays easier to maneuver in tight yards. Choose John Deere 4044M when you need more rear lift (2,500 vs 1,764 lb @ 24″) for heavier three-point tools, or more frame mass (3,770 vs 3,289 lb) for traction and stability. Choose TYM T474 when you need higher verified PTO (35.9 vs 33.6 PTO HP) for cutters, tillers, or snow blowers, or lower operating weight (3,289 vs 3,770 lb) for tight yards. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with John Deere 4044M or TYM T474, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.