John Deere 1025R vs Solis S26
Both sit in the Sub-Compact class with similar engine horsepower (23.9 vs 26 HP). Below: catalog Facts for engine horsepower, weight, and rear lift; PTO and hitch only when verified. The decision points call out who leads on each Fact — engine HP is not a substitute for PTO HP.
Engine horsepower is not PTO horsepower. Missing Facts show as — — we never invent shaft ratings.
How to choose
- Solis S26 lists higher engine horsepower (26 vs 23.9 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers.
- The gap vs John Deere 1025R is small (~2.1 HP) — rear lift or hitch class often matter more day to day.
- Solis S26 is heavier (2,359 vs 1,556 lb operating weight) — usually more stability and traction; John Deere 1025R stays easier to maneuver in tight yards.
- Solis S26 has more rear lift (1,323 vs 758 lb @ 24″) — more headroom for heavier three-point tools. John Deere 1025R needs lighter implements or stricter ballast discipline.
- Hitch differs: John Deere 1025R (Limited Category I) vs Solis S26 (Category I). Implement sheets must name the matching class — adapters do not add lift.
- John Deere 1025R has verified 17.2 PTO HP; Solis S26 is missing that Fact — look it up on the OEM sheet before comparing PTO implements.
- Next step: open the Fit checker with the tractor that wins on your heaviest implement, and screen hitch, PTO, and lift against that attachment.
When to pick each
Choose John Deere 1025R when you need lower operating weight (1,556 vs 2,359 lb) for tight yards, or implement sheets that explicitly list Limited Category I.
Choose Solis S26 when you need more rear lift (1,323 vs 758 lb @ 24″) for heavier three-point tools, more frame mass (2,359 vs 1,556 lb) for traction and stability, or implement sheets that explicitly list Category I.
Spec comparison
| Spec | John Deere 1025R | Solis S26 |
|---|---|---|
| Size class | Sub-Compact | Sub-Compact |
| Engine horsepower | 23.9 HP | 26 HP |
| Operating weight | 1,556 lbs | 2,359 lbs |
| Rear hitch lift @ 24″ | 758 lbs @ 24″ | 1,323 lbs @ 24″ |
| Hitch category | Limited Category I | Category I |
| PTO horsepower | 17.2 PTO HP | — |
| PTO RPM | 540 RPM | 540 RPM |
Sources
FAQ
- Which is better — John Deere 1025R or Solis S26?
- Solis S26 lists higher engine horsepower (26 vs 23.9 HP). That is not a PTO advantage — confirm shaft power separately before buying cutters or tillers. The gap vs John Deere 1025R is small (~2.1 HP) — rear lift or hitch class often matter more day to day. Choose John Deere 1025R when you need lower operating weight (1,556 vs 2,359 lb) for tight yards, or implement sheets that explicitly list Limited Category I. Choose Solis S26 when you need more rear lift (1,323 vs 758 lb @ 24″) for heavier three-point tools, more frame mass (2,359 vs 1,556 lb) for traction and stability, or implement sheets that explicitly list Category I. Use the Fit checker for your heaviest attachment instead of comparing engine HP alone.
- Are these numbers invented?
- No. Engine HP, weight, and rear lift come from catalog Facts; PTO/hitch only from verified overlays. Missing Facts show as — — we never invent shaft ratings.
- How do I check attachments?
- Open the Fit checker with John Deere 1025R or Solis S26, pick an attachment type and model, and read Pass/Fail/Partial on hitch, PTO, and lift.